Tips From the Moving Business Pros: How to Move a Pinball Device



With pinball making a big renewal across the nation, Mild Giant wishes to ensure that these classic, gorgeous makers stay damage-free while being transferred. Oh, and we desire individuals moving them to be safe, too.

Initially look, pinball machines can appear daunting to move due to the fact that of their weight, size, and fragility. Luckily, our skilled Giants have a few techniques up their sleeves to ensure your pinball is moved with ease.
Folding Down the Headbox

The majority of contemporary pinballs (made in the last Twenty Years or so) have a hinge system which enables the headbox to be folded down. Early pinball makers had their headboxes bolted on, using either two or 4 bolts. All Electro-Mechanical pinballs use this system, together with the early Strong State makers.

Later devices have hinges and utilize a latching system to keep the headbox upright. There may likewise be 2 bolts inside as added safety, in case the lock is broken or accidentally un-latched.
Electro-Mechanical Pinballs

For Electro-Mechanical pinball machines, you require to get rid of the headbox rear access panel to acquire access to the bolts and plugs within. Generally this panel has a lock on it to keep it in place, but with time the key may have been lost. Quite typically, there is a screw keeping this panel in place.

Once within, get rid of the bolts and disconnect the large ports that have circuitry decreasing into the machine. You may wish to identify these connectors to put them back in the best area, however they should be different sizes, making it tough to plug back improperly.

You can now remove the headbox completely, or fold the headbox down onto the playfield glass. Ensure you utilize some foam, heavy cardboard, or blankets to secure the headbox from rubbing on the cabinet. Foam is best, as it will help keep the back glass in place.
Early Strong State Pinballs

For early Strong State Pinballs, you will have to remove the back glass. There is a lock located on the headbox in one of 3 areas: the left-hand side at the top, right-hand side at the top or on top of the headbox in the.

Once unlocked, eliminate the back glass by raising it up using the lift channel (at the bottom of the glass), and then pull it out from the bottom.

Open up the back box lamp panel by raising the lock situated on either the left-hand side or right-hand side. The panel can now swing out towards you, and give you access to the circuit boards, plugs, and the bolts. Some Gottlieb pinballs require you to raise up the light panel in order to swing it open.

Now that you are within, you can remove the bolts, and any plugs that have wires going down into the device. You might desire to identify these plugs to put them back in the right spot. You may not have to eliminate the plugs, as the circuitry should be long enough to allow the headbox to be folded down.

At this point, you can lock up the light panel and change the back glass.
Modern Strong State Pinballs

For Data East, Sega, and Stern Modern pinballs, there is a turnable latch system located at the back of the headbox. Using the supplied secret, turn the lock 90 ° counter-clockwise.

For Williams, Bally, and Gottlieb, you can quickly unlatch the back box at the back of the maker. This is a simple setup and requires no tools.

If you can now fold down the head box onto the cabinet, you're done. Ensure you utilize some foam, heavy cardboard, or blankets to secure the headbox from rubbing on the cabinet. Foam is best, as it will also help keep the back glass in place.

You require to get within if you can not fold the head box down. There is a lock situated at the top of the back glass in the center. Use the supplied key to unlock, and eliminate the back glass by raising it up from the bottom, and after that pulling it out from the bottom.

Next, you will need to eliminate the screen panel. (Some more recent Williams and Bally pinballs do not have a different amp panel, it is part of the back glass panel. And later on Sega and Stern pinballs utilize a fluorescent tube for the back glass lighting).

Get rid of the 2 bolts, put the back box back together, and fold down the head box onto the cabinet. Make sure you use some foam, heavy cardboard, or blankets to protect the headbox from rubbing on the cabinet. Foam is best, as it will also help keep the back glass in place.
Eliminating the Legs.

Pinball Device legs are kept in location by 8 bolts. They will be either 5/8 inch or 9/16 inch heads. The modern-day pinballs have captive nuts or threaded plates inside for the bolts to screw into. These bolts can be gotten rid of, and the legs will come off.

These captive nuts and threaded plates can be damaged, and the use of extra nuts may have been required. If this is the case, you will have to open up the front door of the pinball, slide out the playfield glass, and lift up the playfield.

With the front door (coin door) open, move the lock down bar latch across and eliminate the lock down bar. Then slide out the playfield glass, and put in a safe place. Next, raise the playfield by putting your hand where the ball drains pipes, and raise the playfield up.

You must now have access to any nuts that might have been utilized. When moving pinball machine any nuts have actually been eliminated, change the playfield glass and lock down bar, and lock the front door.

Make sure to mark or keep in mind which legs are for the front and back, as they will be changed in a different way to fit.
Packing the Pinball.

You are now prepared to transfer your pinball device. Before you pack it, ensure you eliminate the pinballs so they don't bounce around during transport.

It may be easier to remove the legs just prior to loading the machine if you are moving the pinball using a van or SUV. Get a good friend to assist and have among you supporting the pinball, while the other gets rid of the front legs. Move the device in, and after that eliminate the back legs. It is much easier to load the machine front.

Make sure you strap the pinball in, as you do not want it moving if you have to stop unexpectedly!

For more info Electro-Mechanical pinball makers, you require to get rid of the headbox rear gain access to panel to acquire access to the bolts and plugs inside. (Some newer Williams and Bally pinballs do not have a separate amp panel, it is part of the back glass panel. And later Sega and Stern pinballs utilize a fluorescent tube for the back glass lighting).

If you are moving the pinball utilizing a van or SUV, it might be much easier to eliminate the legs just prior to packing the machine. Grab a friend to website have and assist one of you supporting the pinball, while the other gets rid of the front legs.

Leave a Reply

Your email address will not be published. Required fields are marked *